Beko RFNE9C4E21W User Manual page 20

Troubleshooting
7.
Check this list before contacting the service. Doing so will save you time and money.
This list includes frequent complaints that are not related to faulty workmanship or
materials. Certain features mentioned herein may not apply to your product.
The refrigerator is not working.
The power plug is not fully settled. >>> Plug it in to settle completely into
•
the socket.
The fuse connected to the socket powering the product or the main fuse is
•
blown. >>> Check the fuses.
Condensation on the side wall of the cooler compartment (MULTI ZONE, COOL,
CONTROL and FLEXI ZONE).
The door is opened too frequently >>> Take care not to open the product's
•
door too frequently.
The environment is too humid. >>> Do not install the product in humid
•
environments.
Foods containing liquids are kept in unsealed holders. >>> Keep the foods
•
containing liquids in sealed holders.
The product's door is left open. >>> Do not keep the product's door open for
•
long periods.
The thermostat is set to too low temperature. >>> Set the thermostat to
•
appropriate temperature.
Compressor is not working.
In case of sudden power failure or pulling the power plug off and putting
•
back on, the gas pressure in the product's cooling system is not balanced,
which triggers the compressor thermic safeguard. The product will restart
after approximately 6 minutes. If the product does not restart after this
period, contact the service.
Defrosting is active. >>> This is normal for a fully-automatic defrosting
•
product. The defrosting is carried out periodically.
The product is not plugged in. >>> Make sure the power cord is plugged in.
•
The temperature setting is incorrect. >>> Select the appropriate
•
temperature setting.
The power is out. >>> The product will continue to operate normally once
•
the power is restored.
The refrigerator's operating noise is increasing while in use.
The product's operating performance may vary depending on the ambient
•
temperature variations. This is normal and not a malfunction.
The refrigerator runs too often or for too long.
The new product may be larger than the previous one. Larger products will
•
run for longer periods.
The room temperature may be high. >>> The product will normally run for
•
long periods in higher room temperature.
The product may have been recently plugged in or a new food item is placed
•
inside. >>> The product will take longer to reach the set temperature when
recently plugged in or a new food item is placed inside. This is normal.
Refrigerator/User Manual
19 / 21 EN