Table of Contents
Advertisement
Installation Diagram(For Latch or 5072)
2.2.
Step 1 Install Mortise
Step 2 Install Sliding Screw Casing
1.
The screw casing place is
adjustable from 55mm to
100mm far from the square
shaft.
Depending on the location of
the hole-drilling or the old
door hole.
For Mortice Lock:
Rotate this spindle side
always facing up.
For Latch:
Rotate arrow opposite
to lever direction.
Step 3 Fix Front Panel and Wire
Step 4 Install Back Panel
Step 5 Install the Battery
Step 6 Install the Battery Cover
4
Advertisement
Table of Contents
