Log In To Orbi Web Interface - NETGEAR Orbi RBS750 User Manual

The cable modem router connects to the Internet.
4. If the browser does not display the web page, do the following:
• Make sure that the computer is connected to one of the four LAN Ethernet ports
or over WiFi to the cable modem router.
• Make sure that the cable modem router is receiving power, and that its Power
LED is lit.
• Close and reopen the browser or clear the browser cache.
• Browse to orbilogin.com.
• If the computer is set to a static or fixed IP address (this setting is uncommon),
change it to obtain an IP address automatically from the cable modem router.
5. If the cable modem router does not connect to the Internet, do the following:
a. Review your settings.
b. Make sure that you selected the correct options and typed everything correctly.
c. Contact your ISP to verify that you are using the correct configuration information.
d. Read Troubleshooting on page 102.
If problems persist, register your NETGEAR product and contact NETGEAR
technical support.

Log In to Orbi Web Interface

When you log in to the Orbi, the browser displays the cable modem router web interface.
You can use the cable modem router web interface to change the cable modem router
or satellite settings.
To log in to your Orbi:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the Orbi admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
Connect to the Network and
Access the Cable Modem Router
Orbi WiFi System
22 User Manual