Wifi Connection Using Wps; Types Of Logins - NETGEAR Orbi RBS750 User Manual

Your WiFi-enabled computer or mobile device connects to the WiFi network.

WiFi Connection Using WPS

You can connect to the cable modem router's WiFi network with Wi-Fi Protected Setup
(WPS) or you can find and select the WiFi network.
To use WPS to connect to the WiFi network:
1. Make sure that the cable modem router is receiving power (its Power LED is lit).
2. Check the WPS instructions for your computer or WiFi device.
3. Press the Sync button on the cable modem router.
4. Within two minutes, on your WiFi-enabled computer or mobile device, press its WPS
button or follow its instructions for WPS connections.
Your computer or mobile device connects to the WiFi network.

Types of Logins

Separate types of logins serve different purposes. It is important that you understand
the difference so that you know which login to use when.
Types of logins:
• Internet service login. The login that your Internet service provider (ISP) gave you
logs you in to your Internet service. Your service provider gave you this login
information in a letter or some other way. If you cannot find this login information,
contact your service provider.
• WiFi network key or password. Your cable modem router and satellite are preset
with the same WiFi network name (SSID) and password for WiFi access. This
information is on the cable modem router label and the satellite label.
• Cable modem router admin login. The cable modem admin login credentials logs
you in to the cable modem router interface from a web browser as admin. The default
admin user name is admin. The first time you log in to the cable modem router, you
are prompted to change the admin password.
Connect to the Network and
Access the Cable Modem Router
Orbi WiFi System
20 User Manual