Page 1
CONTACT US FIRST CONTACT US FIRST sauder.com sauder.com sauder.com BEFORE MAKING ANY RETURNS TO THE STORE. BEFORE MAKING ANY RETURNS TO THE RETAILER. sauder.com/service Visit to order replacement parts, view video assembly tips, or chat with a live rep. 1-800-445-1527 Prefer the phone? Give us a ring at Customer Service is available Monday-Friday - 9 a.m.
Part Identification å Use this part identification to help identify the parts. RIGHT END (1) LEFT END (1) UPRIGHT (1) TOP (1) MODESTY PANEL (1) BACK (1) ADJUSTABLE SHELF (1) SHELF (1) BOTTOM (1) DOOR (1) Page 2 www.sauder.com/service 429357...
The arrow in the HIDDEN CAM must point Arrow toward the hole in the edge of the board. Hidden Cam Hole Insert the CAM SCREW or CAM DOWEL into the HIDDEN CAM. Tighten the HIDDEN CAM. Page 4 www.sauder.com/service 429357...
Step 1 Look for this icon. It means a video assembly tip is available at www.sauder.com/service/tips Find the numbered video or scan the QR code. å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor.
Page 6
Fasten the UPRIGHT (M) to the TOP (N). Tighten two HIDDEN CAMS. å Insert four METAL PINS (26) into the ENDS (K and L) as shown. Finished edge D E N H I D i t h f a c S u r Page 6 www.sauder.com/service 429357...
Page 7
Fasten the SHELF (R) and BOTTOM (S) to the UPRIGHT (M). Use four 1-3/4" FLAT HEAD SCREWS (27). å Insert the MAGNETIC CATCH (19) into the holes on the SHELF (R). Finished edge 1-3/4" FLAT HEAD SCREW (4 used in this step) 429357 www.sauder.com/service Page 7...
Page 8
NOTE: You may want to start each SCREW a few turns before completely tightening any of them. Finished edge i t h f a c o l e S u r e r h f e w 1-3/4" FLAT HEAD SCREW (6 used in this step) Page 8 www.sauder.com/service 429357...
Page 9
Rome. This can be built Use two 1-3/4" FLAT HEAD SCREWS (27). in a day. U n fi n i s h s u r f a c Notch Unfinished edge 1-3/4" FLAT HEAD SCREW (2 used in this step) 429357 www.sauder.com/service Page 9...
Page 10
Step 6 å Fasten the LEFT END (L) to the TOP (N) and MODESTY PANEL (O). Use four 1-3/4" FLAT HEAD SCREWS (27). Finished edge 1-3/4" FLAT HEAD SCREW (4 used in this step) Page 10 www.sauder.com/service 429357...
Page 11
Fasten the BACK (P) to your unit using the NAILS (25). å NOTE: Perforations have been provided for access through the BACK. Carefully cut out the holes needed. NAIL (20 used in this step) Perforations should be here. Cut out the holes needed for cord access. 429357 www.sauder.com/service Page 11...
Page 12
FLAT HEAD SCREW (29). å Turn the STRIKE PLATE (21) into the hole in the DOOR (T). IMPORTANT: Only fasten one PIVOT HINGE to each DOOR in this step. 1/2" FLAT HEAD SCREW (1 used in this step) Page 12 www.sauder.com/service 429357...
Page 13
SCREW. å Fasten the PULL (23) to the DOOR (T). Use two 3/4" PAN HEAD SCREWS (28). 1/2" FLAT HEAD SCREW (1 used in this step) 3/4" PAN HEAD SCREW (2 used for the PULL) 429357 www.sauder.com/service Page 13...
Page 14
NOTE: Please read the back pages of the instruction booklet for important safety information. å This completes assembly. Clean with a damp cloth. Wipe dry. And to celebrate, why not share your success story at sauder.com or 20 lbs. 50 lbs.
élément et REFERENCE DESCRIPTION QUANTITÉ REFERENCE DESCRIPTION QUANTITÉ conserver le livret pour future référence. Pour contacter Sauder en EXTRÉMITÉ DROITE ..........1 EXCENTRIQUE ESCAMOTABLE .....2 ce qui concerne cet EXTRÉMITÉ GAUCHE ..........1 VIS D'EXCENTRIQUE ..........2 élément, faire référence MONTANT................1 LOQUETEAU MAGNÉTIQUE ......1 au numéro de lot et...
Page 16
Utiliser quatre VIS TÊTE PLATE 44 mm NOIRES (27). VIS TÊTE PLATE 13 mm (29). Enfoncer un LOQUETEAU MAGNÉTIQUE (19) dans les trous sur la TABLETTE (R). Faire tourner la PLAQUE DE BUTÉE (21) dans le trou de la PORTE (T). Page 16 www.sauder.com/service 429357...
Page 17
REMARQUE : Pour ajuster la PORTE, desserrer les VIS dans la Ceci complète l'assemblage. Nettoyer avec un tissu humide. CHARNIÈRE, ajuster et serrer la VIS. Essuyer. Fixer la POIGNÉE (23) à la PORTE(T). Utiliser deux VIS TÊTE GOUTTE DE SUIF 19 mm (28). 429357 www.sauder.com/service Page 17...
EXTREMO DERECHO ..........1 EXCÉNTRICO ESCONDIDO .......2 su referencia futura. Si necesita ponerse en EXTREMO IZQUIERDO ..........1 BIELA DE EXCÉNTRICO ........2 contacto con Sauder en PARAL ...................1 AGARRADOR MAGNÉTICO ........1 cuanto a esta unidad, PANEL SUPERIOR ............1 BISAGRA DE PIVOTE ..........2 refiérase al número...
Page 19
Fije una BISAGRA DE PIVOTE (20) a la PUERTA (T). Utilice un el ESTANTE (R). TORNILLO DE CABEZA PERDIDA de 13 mm (29). Gire la PLACA DE CONTACTO (21) en el agujero de la PUERTA (T). 429357 www.sauder.com/service Page 19...
Page 20
Esto completa el ensamblaje. Limpiar con un trapo húmedo. BISAGRA, haga los ajustes necesarios y apriete el TORNILLO. Seque con un paño. Fije el TIRADOR (23) a la PUERTA (T). Utilice dos TORNILLOS DE CABEZA REDONDA de 19 mm (28). Page 20 www.sauder.com/service 429357...
à Les téléviseurs peuvent être particulièrement un téléviseur. cet effet. lourds. De plus, le poids et l’emplacement du tube image ont tendance à rendre les téléviseurs instables et enclins à tomber vers l’ a vant. 429357 www.sauder.com/service Page 21...
Page 22
Además, el peso y la ubicación del tubo de imagen tienden a causar la inestabilidad de televisores y propensa a volcarse hacia adelante. Page 22 www.sauder.com/service 429357...
à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
Page 24
BEFORE MAKING ANY RETURNS TO THE RETAILER. So, how did it go? Dear Valued Customer: Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built.