Advertisement
Maintenance
Make sure that all nuts and screws are tight and are not
damaged.
Clean the air filter. Replace it if it is necessary.
Do a check of the engine oil level.
Do a check of the oil level of the gearbox. Fill oil if it is
necessary.
Make sure that there is no leakage of fuel, engine oil and
lubrication.
Do a check of the fuel level. Fill fuel if it is necessary.
If there is too much vibration in the product, do a check
of the cause.
Replace the oil and lubrication of the engine and the
gearbox.
Clean the oil filter.
Clean the fuel filter and the area around the fuel filter.
Replace the air filter.
Replace the gears and bearings.
To clean the foam air filter
CAUTION:
as this can cause damage to the foam air
filter.
1. Remove the foam air filter. (Fig. 57)
2. Examine the foam air filter. Clean the foam air filter
with warm soap water.
CAUTION:
that is damaged or cannot be fully
cleaned.
•
For transportation shorter distances, refer to
move the product with the wheel kit on page 15 .
•
Let the product become cool before you put it in
storage.
•
Always use approved containers for storage and
transportation of fuel.
•
Keep the product in a dry and frost-free area.
16
Do not use compressed air
Replace a foam air filter
Transportation and storage
To
Maintenance interval in hours
Daily
mainte-
20 hours
nance
or each
before
month
operation
X
X
X
X
X
X
X
X
X
CAUTION:
air filter is dry before you install it.
To clean the oil filter
•
Refer to the illustration. (Fig. 58)
•
Make sure that there are no leaks or fumes from the
product. Sparks or open flames, for example from
electrical devices or boilers, can start a fire.
•
Put a cover on the product and safely attach the
product during transportation to prevent damage
and accidents. Use an approved vehicle for
transportation of the product.
•
Do not lift the product.
1000
150
500
hours or
hours or
hours or
1 time
each 3
each 6
each
months
months
year
X*
X*
X
X
X
X
X
Make sure that the foam
1668 - 002 - 10.05.2023
X
X
X*
X**
Advertisement
