Table of Contents
Advertisement
Care
Care and Cleaning
„ Titanium apatite deodorizing filter
1.
Open the front panel and
pull out the air filters.
2.
Take off the titanium apatite
deodorizing filters.
• Remove the filters from the tabs.
3.
Clean or replace the
titanium apatite deodorizing
filters.
[Cleaning]
3-1 Vacuum dust, and soak in lukewarm
water or water for about 10 to
15 minutes if very dirty.
3-2 After washing, shake off remaining
water and let them dry in the shade.
• Do not wring out the filter to remove water from it.
21
09/12 class
Page 20
Tabs
Tabs
[Replacement]
Remove the filter from the tabs
and prepare a new one.
Tabs
Tabs
• Dispose of the old filter as non-flammable waste.
4.
Insert the titanium apatite
deodorizing filters as they
were.
• When attaching the filter, check that the filter is
properly set in the tabs.
5.
Reattach the filters.
6.
Close the front panel slowly.
NOTE
• Operation with dirty filters:
− cannot deodorize the air,
− cannot clean the air,
− results in poor heating or cooling,
− may cause odor.
• Dispose of old filters as non-flammable waste.
• To order a titanium apatite deodorizing filter, contact the dealer
where you bought the air conditioner.
Titanium apatite deodorizing filter 1 set
Item
(2 pieces)
Part No.
KAF970A46 (without frame)
Page 20
Page 20
Advertisement
Table of Contents
