Code
8C
AC
AC6
DC1
0
If any information code keeps appearing on the screen, contact a local Samsung service
centre.
WW80TA046AX_04218T-01_EN.indd 55
The MEMS sensor is not working properly.
•
Turn the machine off, and restart the cycle.
If the information code remains, contact a customer service
•
centre.
Check communications between main and sub PBAs.
•
Turn the machine off, and restart the cycle.
If the information code remains, contact a customer service
•
centre.
Check communications between main and inverter PBAs.
•
Depending on the state, the machine may automatically returns
to normal operation.
•
Turn the machine off, and restart the cycle.
•
If the information code remains, contact a customer service
centre.
The Main Door lock/unlock is not working properly.
•
Turn the machine off, and restart the cycle.
•
If the information code remains, contact a customer service
centre.
The machine does not turn off automatically after the last
spinning process, and the "0" message remains.
•
The machine operates normally without running the DRUM
CLEAN cycle. However, it is recommended to run the cycle for
hygienic purposes.
Action
English 55
2022/7/13 9:56:58