Samsung WW9 TA Series User Manual page 25

Hide thumbs Also See for WW9 TA Series:

Table of Contents

WARNING

Stop using the washing machine if there is a water leak, and contact a local Samsung

service centre. Otherwise, this may cause electric shock.

CAUTION

Do not stretch the water hose by force. If the hose is too short, replace the hose with a

longer, high-pressure hose.

NOTE

• After connecting the water hose to the adaptor, pull the water hose down to check if it

is connected properly.

• Use a popular type of water taps. If the tap is square-shaped or too big, remove the

spacer ring before inserting the tap into the adaptor.

For models with an additional hot water inlet:

WW80TA046AX_04218T-01_EN.indd 25

9. Open the water tap and check if there

are any leaks around the connection

areas. If there are water leaks, repeat the

steps above.

1. Connect the red end of the hot water

hose to the hot water inlet on the back

of the machine.

2. Connect the other end of the hot water

hose to the hot water tap.

English 25

2022/7/13 9:56:50

Table of Contents

Show Quick Links

Table of Contents

Ww8 ta seriesWw9 ta 4 seriesWw9 ta 2 seriesWw8 ta 4 seriesWw8 ta 2 seriesWw80ta046ax