How It Works - TecTecTec PROWILD Service Manual

4. How it Works

1. Turn the eyepiece of the monocular until the target becomes clear.
2. The PROWILD has two buttons: "Start" button and "Mode" button. Press
button for about 1 second and the PROWILD will start. The LCD will display as below:
3. The PROWILD has two modes: "Range Mode" (Default) and "Speed Mode". Shortly press
the "MODE" button, and modes will shift to each other. When "Range Mode" is chosen,
"Range"will appear in the LCD. Shortly press the " " button and the distance data will
display in the LCD immediately. If holding pressing the " " button, scan function starts.
The newly acquired data will display continuously in the LCD. After releasing the " "
button, scan function will stop and the LCD will return to initiative state.
4. The laser indicator " " will blink when laser is transmitting. While measuring, if the
re ection of target is too weak, the LCD will display "----". If the measurement of distance
succeeds, "Quality＞＞＞＞＞＞" will appear in the LCD. The more symbols "＞", the
stronger the laser re ection is. "Range mode" displays as below.