Operator Safety - TEXA TMD MKG SA Manual

3.3 Operator Safety

Safety Measures:
• Wear adequate personal protective equipment during all the operating phases.
• Do not handle or touch the device with wet hands.
• If liquid should penetrate inside the device, contact technical assistance.
• Do not wear metal rings or bracelets when working on batteries.
Safety Measures:
• Avoid sparks or flames near the installation.
The device was manufactured to be electrically safe and
insulated and to work with specific supply voltage levels.
Improper use may expose the operator to the risk of electric
shock, even though of low intensity.
The device was manufactured to be electrically safe and
mechanically resistant.
However, it is necessary to reduce the risk of damages to the
device that may cause burns.
If the device gets wet or damaged, or comes into contact with
liquids, this may cause short circuits, fire, material damage or
serious injury.
Never use a wet or damaged device.
9