Device Safety - TEXA TMD MKG SA Manual

3.4 Device Safety

Safety Measures:
• Do not drop, shake or knock the device.
• Do not carry out any type of intervention that may damage the device.
• Do not open or disassemble the device.
• Make sure the device is properly fastened before moving the vehicle on which it is installed.
Safety Measures:
• Do not wet the device with water or other liquids.
• The device's power supply must always be connected following the indications provided by
the Assistance Service.
• Do not use external batteries to power the device.
• Wear the most suitable personal protective equipment to avoid static electricity.
Safety Measures:
• Position the device as indicated in this manual.
• Do not expose or install the device near sources of heat.
• Always place the device in a dry area.
• Do not expose the device to rain or water jets.
• Do not use corrosive chemicals, solvents or harsh detergents to clean the device.
10
The device was manufactured to be mechanically resistant.
Careless use and excessive mechanical strain may impair its
efficiency.
The device was manufactured to be electrically safe and to work
with specific supply voltage levels.
Failure to comply with the specifications related to the power
supply may impair its efficiency.
The device was designed to be used in specific environmental
conditions.
Installing and using the device in environments with
temperatures and humidity that differ from those indicated may
impair its efficiency.