Table of Contents
Advertisement
How to wash
If the RINSE HOLD
option has been selected, the water must be
emptied out before opening the door either
- by pressing the START/PAUSE button (the laundry will be spun at the
speed corresponding to the selected type of fabrics. The spin speed
can be reduced by means of the SPIN SPEED button)
- or by turning the selector dial to O and then to DRAIN "C" and
pressing the START/PAUSE button again. In this case the water will be
emptied, but the laundry is not spun.
Turn the selector dial to O to switch the machine off.
Remove the laundry from the drum.
Check that the drum is empty so as to avoid any forgotten items
being damaged in a subsequent wash (e.g. shrinking) or their colour
running into a load of whites.
Close the water tap.
Leave the door open to prevent the formation of mildew and unpleas-
ant smells.
71
Advertisement
Table of Contents
