Table of Contents
Advertisement
TRIMMING
Beard Trimmer:
To remove the shaver head, simply pull upwards from the neck of the shaver for easy
release. To attach the beard trimmer attachment, align it with the neck attachment cavity
so that it clips into position. The beard trimmers micro setting zoom comb can be adjusted
to suit your required length setting, between 2-6mm. The setting can be adjusted by
turning the wheel either left or right.
Without the beard comb attachment, the length of hair cut will be 0.4mm.
Pop-up Trimmer:
1.
Push trimmer release button to engage trimmer (Diagram D).
2.
Trim sideburns and facial hair.
3.
Close trimmer by pressing down (Diagram E).
D
FACIAL CLEANSING
The daily cleansing facial brush is infused with charcoal to remove impurities and energise
the skin.
TO ATTACH & REMOVE THE FACIAL BRUSH:
•
Hold the handpiece with one hand.
•
With the other hand, gently pull the shaver head attachment head upwards until it
comes off.
•
To attach the facial brush attachment, gently push the brush down aligning it with
the cavity opening until it locks in place. Gently wriggle the attachment head to
ensure it is locked in place, if it comes loose gently remove the head and realign it
until it is snugly attached to the handpiece.
•
To remove the facial brush attachment, gently pull the head upwards until it comes off.
CLEANSING TIPS:
Add a drop of facial cleanser to the brush head and dampen under the faucet or shower.
Press on/off button to turn on. Divide your face into 4 main sections; forehead, nose and
chin, left cheek, right cheek. While applying gentle pressure, move the rotating brush in
circular motions over each section for approximately 30 seconds.
E
7
Advertisement
Table of Contents
