Notifications & Status Bar - Huawei MatePad 11 User Manual

Go to Settings > Display & brightness > Eye Comfort and enable or disable Enable all
•
day.
Once Eye Comfort mode is enabled,
will take on a yellow tint since less blue light is being emitted.
Set a Schedule for Eye Comfort Mode
Go to Settings > Display & brightness > Eye Comfort, enable Scheduled, then set Start and
End according to your preferences.
Adjust the Blue Light Filter in Eye Comfort Mode
Go to Settings > Display & brightness > Eye Comfort, enable Enable all day or set up
Scheduled, and adjust the slider under Filter level to customize how much blue light you
would like to be filtered.
Notifications & status bar
Notification and Status Icons
Network status icons may vary depending on your region or network service provider.
Supported features vary depending on the device model. Some of the following icons
may not be relevant to your tablet.
5G network connected
3G network connected
Full signal strength
Data saver enabled
Hotspot enabled
Hotspot disconnected
Wi-Fi connected
Wi-Fi 6 connected
Wi-Fi 6+ connected
Dual Wi-Fi connected
will be displayed in the status bar, and the screen
4G network connected
2G network connected
Roaming
No SIM card inserted
Hotspot connected
Switching networks via Wi-Fi+
Wi-Fi network is faulty, unable to
connect to the Internet
Wi-Fi 6 network is faulty, unable
to connect to the Internet
Wi-Fi 6+ network is faulty, unable
to connect to the Internet
Dual Wi-Fi connected, with the
main Wi-Fi supporting Wi-Fi 6
Settings
79