Time-Lapse Photography - Huawei MatePad 11 User Manual

Enhance video colors and contrasts: Touch
•
Once this feature is enabled, the colors and contrasts in the video will be improved.
However, playing the video on an incompatible device or using incompatible software
may result in sub-optimal effects. Please exercise caution when enabling this feature.
Select a space-saving video format: Touch
•
Once this feature is enabled, your tablet will use a video format that takes up less
storage space. However, this may result in other devices being unable to play the video.
Please exercise caution when enabling this feature.
Some of these features may not be supported on your device. Changing a specific
setting will sometimes cause other settings to change as well.
3
Touch to begin recording.
If you are using the rear camera to record a video, touch and hold down on
gradually zoom in or out.
Touch to take a shot of the current frame.
4
Touch to pause, and touch
Shoot 4K UHD Videos
Your tablet supports 4K Ultra HD (UHD) video recording, allowing you to record in even
greater clarity.
1
Open Camera and select Video mode.
2
Go to > Video resolution and select the 4K resolution.
Beauty mode, filters, and special effects are not supported at 4K, and will be
automatically disabled when you select the 4K resolution.
3
Return to the Video screen and touch
A higher resolution will result in a higher quality video, but will also take up more
storage space.

Time-Lapse Photography

Use Time-Lapse to Create a Short Video
You can use Time-lapse to capture images slowly over several minutes or even hours, then
condense them into a short video. This allows you to capture the beauty of change –
blooming flowers, drifting clouds, and more.
1
Go to Camera > More and select Time-lapse mode.
2
Place your tablet in position. To reduce camera shake, use a tripod to steady your tablet.
, and enable HDR Vivid.
, and enable High efficiency format.
to stop recording.
to start recording.
Camera and Gallery
or to
55