Settings; Use Eye Comfort Mode; Notification And Status Icons - Huawei MatePad Pro User Manual

Settings

Use Eye Comfort Mode

Eye comfort mode can effectively reduce harmful blue light and adjust the screen to display
warmer colours, relieving eye fatigue and protecting your eyesight.
Enable or Disable Eye Comfort Mode
Swipe down from the upper right edge of the screen to display Control Panel and touch
•
to expand the shortcut switches panel (depending on your device model). Enable or
disable Eye Comfort. Touch and hold Eye Comfort to access the settings screen.
Go to Settings > Display & brightness > Eye Comfort and enable or disable Enable all
•
day.
Once Eye Comfort mode is enabled,
will take on a yellow tint since less blue light is being emitted.
Set a Schedule for Eye Comfort Mode
Go to Settings > Display & brightness > Eye Comfort, enable Scheduled, then set Start and
End according to your preferences.
Adjust the Blue Light Filter in Eye Comfort Mode
Go to Settings > Display & brightness > Eye Comfort, enable Enable all day or set up
Scheduled, and adjust the slider under Filter level to customise how much blue light you
would like to be filtered.

Notification and Status Icons

Network status icons may vary depending on your region or network service provider.
Supported features vary depending on the device model. Some of the following icons
may not be relevant to your device.
5G network connected
3G network connected
Full signal strength
Data saver enabled
Hotspot enabled
will be displayed in the status bar, and the screen
4G network connected
2G network connected
Roaming
No SIM card inserted
Hotspot connected
65