Table of Contents
Advertisement
10. Equipment Specifications
Drum Pump
Maximum operating air pressure
Pump ratio
Flow rate approximately
Volume of compressed air
Guideline pressures are as follows:
Air pressure for all Wire Rope Diameters 5.5 – 7 bar (80-105 psi).
Viper Collar
• Cast aluminium construction with enhanced mechanical properties and
excellent resistance to corrosion, heat treated to T6.
• Lugs tested to withstand 800kg of resistance.
• Coating: 3 coat treatment.
• Salt – Spray Resistance to ASTM B117-73
• Humidity Resistance to ASTM D2247
Seals
• Estimated average operation life – 10,000 + metres
• Shelf life 2-3 years (based on correct storage)
• Chemically resistant to commercially available mineral wire rope
lubricants.
• The lubricator Seals may be washed with mild petroleum cleaner.
• Do not leave the Seals to soak in cleaning fluid which may be detrimental
to their composition.
• It is important to store the Seals away from UV light. The Seals will be
harmed if left for extended periods in sunlight.
• Seals should be kept in sealed plastic bag as supplied.
NOTE: Lubrication Engineering reserves the right to change specifications as and when required.
www.viperwrl.com
Phone: +61 2 9636 5655
Assembly & Operations
Standard Kit
8 bar/120 psi
50:1
2,900 gram per min 4,500 gram per min
165 L/min at 7 bar
- 2,000 hours
- 1,000 hours
Manual
High Speed Kit
8 bar/120 psi
45:1
250 L/min at 7 bar
39
Advertisement
Table of Contents
