Table of Contents
Advertisement
8.0 Equipment Specifications
Drum Pump
Maximum operating air pressure
Pump ratio
Flow rate approximately
Volume of compressed Air
Guideline pressures are as follows:
Air Pressure for all Wire Rope Diameters 4 - 7 bar (60-105 psi)
Viper Collar
• Cast aluminium construction with enhanced mechanical properties and
excellent resistance to corrosion, heat treated to T6.
• Lugs tested to withstand 800kg of resistance.
• Coating: 3 coat treatment.
• Salt – Spray Resistance to ASTM B117-73
• Humidity Resistance to ASTM D2247
Seals
• Estimated average operational life – 10,000+ meters
• Shelf life 2-3 years (based on correct storage)
• Chemically resistant to commercially available mineral wire rope lubricants.
• The lubricator seals may be washed with a mild petroleum cleaner.
• Do not leave the seals to soak in cleaning fluid which may be detrimental to
their composition.
• It is important to store the seals away from UV light, the seals will be harmed
if left for extended periods in sunlight.
• Seals should be kept in a sealed plastic bag as supplied.
Scrapers
• 5083 Grade Aluminium Alloy High resistance to corrosion and ideal for marine
applications.
(Note: Lubrication Engineers reserves the right to change specifications as and when required.)
120 psi
45:1
4,500 gram per min
250L/min at 7 bar
- 2,000 hours
- 1,000 hours
Page | 31
Advertisement
Table of Contents
