Table of Contents
Advertisement
3. Select "LG-PN7 (XX)" .
LG-PN7(XX)
,
Note
y XX means the last two digits of
Bluetooth address. For example, if your
unit has a Bluetooth address such as
9C:02:98:4A:F7:08, you will see "LG-PN7
(08)" on your Bluetooth device.
y Depending on the Bluetooth device type,
some devices have a different pairing way. For
details about Bluetooth pairing, refer to your
Bluetooth device manual.
4. When this unit is successfully connected with
your Bluetooth device, Bluetooth LED will turn
on with the sound.
5. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device' s user guide.
,
Note
y When using Bluetooth technology, you have
to make a connection between the unit and
the Bluetooth device as close as possible and
keep the distance close.
However you may experience issues in the
cases Below:
- There is an obstacle between the unit and
the Bluetooth device.
- There is a device using same frequency
with Bluetooth technology such as a
medical equipment, a microwave or a
wireless LAN device.
y If Bluetooth connection does not work
well, go to step 1 of "Pairing your unit and
BLUETOOTH device" and try again.
y The sound may be interrupted when the
connection has interference caused by other
electronic waves.
y Depending on the type of the device, you may
not be able to use the Bluetooth function.
y You can enjoy Bluetooth function using
Smart phone, Notebook, etc..
y The more distance between the unit and the
Bluetooth device, the lower the sound quality
becomes.
y Bluetooth connection will be disconnected
when the unit is turned off or the Bluetooth
device gets too far from the unit.
y When Bluetooth connection is disconnected,
connect the Bluetooth device to the unit
again.
y Bluetooth connection will be maintained
even if you change the Bluetooth function to
a different function.
y When you connect a Bluetooth device (iOS
device etc.) to this unit or operate the device,
the volume level will be synchronized between
each device.
y When the unit is not connected, Bluetooth
LED will blink.
y When you use the Bluetooth function, adjust
the volume to a proper level on the Bluetooth
device.
Operating
19
2
Advertisement
Table of Contents
