Table of Contents
Advertisement
WARNING
Children can be harmed by small
parts, sharp edges and sharp points
in the vehicle's unassembled state,
or by electrical items. Care should be
taken in unpacking and assembly of
the vehicle. Children should not handle
parts, including the battery, or help in
assembly of the vehicle.
Front End
1
• Turn the vehicle upside down.
• Fit the front end to the vehicle. Make sure the sides of the
front end wrap around the vehicle. You may need to check
this for assembly steps 2 -5.
2
BOTTOM VIEW
• Fit a #8 x
/
" screw through the hole shown in the front
3
4
end and into the vehicle. Tighten the screw.
R8548pr-0920
Vehicle
FRONT VIEW
#8 x
/
" Screw
3
4
Assembly
3
• Fit another #8 x
front end and into the vehicle. Tighten the screw.
Hint: You may need to adjust the front end to align the holes.
4
• Grasp the bar on the front end and pull it out and up to
properly position the front end.
7
#8 x
3
/
" Screw
4
3
/
" screw through the hole shown in the
4
Bar
Advertisement
Table of Contents
