sky viper V2900PRO Flying Manual

2900
v pro
VIDEO DRONE STREAMING

POWERING UP AND PAIRING (WITH ALTITUDE ON)

Connect battery wires on bottom of drone.

FLYING BASICS

1
Press Auto Launch to launch a few feet off the ground.
3
Use the directional Thumbstick to fly in any direction.

FLIGHT CONTROLS

THROTTLE/ROTATION STICK
• While in manual flight mode push the throttle
stick forward to make drone lift.
• The further you push the throttle stick, the
faster you lift.
(
Up and down controls only apply to manual
Press up
flight mode.
to lift
Video Record Button
Power Indicator LED
Press down
to descend
THROTTLE/
ROTATION STICK
Press left
to rotate
counter-
clockwise Rotation Trim
Power On/
Off Switch
Press right
to rotate
clockwise

AUTO RETURN HOME

• Press the button to bring the V2900
to a stop, fly back to you and land at
your feet.
01601
Online Video Instructions & Flying Tips available now at SKYVIPER.COM
Place drone on flat surface.
2
Use the throttle Thumbstick to fly approximately 12" higher or lower.
4
Press the Auto Land button to land.
DIRECTION STICK
• Push the direction stick forward to fly forward or
away from you (Green blade in front). Push
backwards to fly backward. The further you push,
the faster the drone will fly in that direction.
(
• Push the direction stick left to fly left. Push right
to fly right. The further you push, the faster
the drone will fly sideways.

AUTO LAUNCH/LAND BUTTON

• Press the auto launch
button to launch a few feet
from the ground.
(Exact height may vary.)
• Press the auto land button
to land the drone by itself.
LANYARD HOOK
Turn on remote.
Press up to
fly forward
Photo Button
Press down
to fly
backward
DIRECTION STICK
Forward/
Press left
to fly left
Backward Trim
Left/Right Trim
Press right
to fly right
FLYING GUIDE
Wait for flashing green light to turn solid.
TOGGLE INTO MANUAL FLIGHT BEFORE TAKE-OFF
• Hold stunt button and press auto land/auto launch button
and a tone will sound from the remote. Make sure your
throttle stick is in the down position.
• Push the throttle stick up to begin manual flight.
TOGGLE INTO MANUAL FLIGHT WHILE IN AUTO-HOVER
• Hold stunt button and press auto land/auto launch button
and a tone will sound from the remote. Make sure your
throttle stick is in the down position.
• After the tone is heard, move the throttle stick up until
the drone starts to rise. (If throttle is not matched in
5 seconds then manual flight will be cancelled.)
TOGGLE INTO AUTO HOVER WHILE IN MANUAL FLIGHT
• Press either the up or down altitude locking button to
toggle back into auto hover. (Your drone will hover at the
current throttle speed.)

FLYING TIPS

• When launching the drone, face the same
direction as the drone. Green blades and green
LEDs should be in front.
• If your drone drifts in any direction when you are
hovering, you will need to make Trim
adjustments to correct the driving. Trim
adjustments are sometimes needed when the
drone is first flown after purchase. See TRIM
ADJUSTMENTS section for details.
• Practice launching, hovering and landing before
attempting to learn other moves.
• Flying 2 to 3 feet above the ground will reduce
ground turbulence and make flying easier.
• When first attempting to fly in different
directions, start by tapping the direction stick
until you have a feel for it. Always move controls
slowly until you become comfortable operating
the drone.
• Once you've mastered flying in directions,
practice rotational controls. Spinning and
keeping drone facing the same direction as you
makes flying easier and more intuitive.
• Stay 2 to 3 feet away from walls and ceilings
as drone will be drawn towards them if you fly
too close.
• If propeller blades come in contact with
another object or you crash, throttle down or
auto land immediately to prevent possible or
further damage.
• If anything prevents drone's blades from
spinning or they become jammed, throttle
down or auto land immediately. Do not attempt
to fly until obstruction has been removed and
damage fixed.
• Should something prevent drone's blades from
spinning, drone may auto shutdown. LiPo
battery will need to be unplugged then
reconnected to restore flying power.
• If the drone flies too far away, beyond the
control range of the remote, the drone will
auto-land to prevent the drone from flying away
out of control.