Table of Contents
Advertisement
Sani A
This program is ideal to use when hygiene demands are set high.
The temperature of the main wash is 60 °C. The final rinse is 85
°C for 6 minutes.
Sani B
Choose Sani B if you want a quicker program that still fulfils hygiene
demands. The temperature of the main wash is 50 °C. The final
rinse is 85 °C for 3 minutes.
Heavy wash
Program for very dirty dishes, such as pans, casserole dishes and
oven dishes. If these dishes do not completely fill the dishwasher,
you can add plates and the like.
Normal wash
Use to wash normally dirty dishes, and even dishes with dried
leftovers, such as plates, serving dishes, cups, glasses and so on.
Daily wash
A program suitable for day-to-day dishwashing. This program can
also clean dried leftovers, but is not intended for burnt food, such
as on oven dishes.
Quick wash
This program is used for glasses and porcelain that is slightly dirty,
such as coffee cups.
Super Quick wash
Short program lasting about 15 minutes with acceptable results
for very slightly dirty dishes.
Delicate wash
If the dishes are not very dirty, you can select Delicate wash. This
program is intended for glasses and porcelain that have just been
used and as such do not require such a powerful program.
This program can be used for fragile dishes. See also the section
Fragile dishes in the chapter Loading the dishwasher.
Eco wash
Use when you want to save water. For normally dirty dishes.
Rinse & Dry
This program comprises a rinse with heating and drying. This is a
suitable program if, for example, you plan to make jam and want
to rinse and heat clean glass jars.
8
Rinse & Hold
Used to rinse dishes while you wait for the dishwasher to become
fully loaded.
START THE DISHWASHER
Press and hold Start/Stop until the display shows
open symbol). This indicates that the dishwasher is ready to start.
Close the door properly, otherwise the dishwasher will not start.
The display flashes three times with the remaining time to indicate
that the program has started.
NOTE!
If the machine does not start within 2 minutes of the last button
press, the display returns to showing the last program run.
TIME REMAINING
Once you have selected a program, the display indicates how long
the program took the last time it was used. Once you have started
the dishwasher, the display indicates how much program time
remains. The remaining time is updated after the water for the
final rinse has been heated.
This may differ somewhat from time to time depending on the
temperature of the water supply, the amount of dishes, the
ambient temperature and other factors.
While the program is running, the time counts down and the
remaining program time is shown on the display. The remaining
time is shown, for example, as 1:15, which means the program will
run for another 1 hour and 15 minutes.
NOTE!
During the first run of each program, the remaining time
displayed can be slightly misleading, as the dishwasher is estimating
the time. When you run the program a second time, the
dishwasher will calculate the remaining time based on the
previous duration of the program.
STOPPING OR CHANGING A PROGRAM
If you want to change program after starting the dishwasher, open
the door then press and hold Start/Stop for three seconds. Add
more detergent if the lid of the detergent dispenser has opened.
Then choose a new program, press Start/Stop and close the door.
DO YOU WANT TO ADD MORE DISHES?
Open the door. The dishwasher stops automatically. Add the
dishes, close the door and the dishwasher continues the program.
(the door
Advertisement
Table of Contents
