Install Esp - Siemens SIMATIC Ident MV340 System Manual

Install ESP

ESP Software can be found on the CD that is packaged with the SIMATIC MV340.
1. Follow the prompts to install ESP from the CD.
2. Click on the ESP icon to run the program.
ESP System Requirements
• 166 MHz Pentium processor (Pentium II processor recommended)
• Windows 7, Vista, XP, or 2000 operating system
• Internet Explorer 5.0 or higher
• 64 MB minimum RAM (128+ MB RAM recommended)
• 80 MB hard drive space
• 800 x 600 minimum 256 color display (1024 x 768 32-bit color recommended)
Important: The imager must be in one of the modes below to communicate with ESP.
Read the symbol below that corresponds with your communication interface, and then
read the Save Settings symbol.
USB
Connect
USB
Mode
RS-232
Connect
RS-232
Mode
Save
Settings
SIMATIC MV340 User's Manual
Quick Start
1-5