Rs-232 Interface - Siemens SIMATIC Ident MV340 System Manual

RS-232 Interface

RS-232 Interface
Note: Unlike USB, the RS-232 interface does not draw its power from the host computer.
RS-232 Configuration
Item
1 SIMATIC MV340
RS-232 interface cable, 2,4m; without Power
2
Supply
RS-232 interface cable, 2,4m; with Power Supply
3
(USA)
RS-232 interface cable, 2,4m; with Power Supply
4
(EU, S. America)
RS-232 interface cable, 2,4m; with Power Supply
5
(UK)
Installation Steps for RS-232
1. Power-off the host.
2. Connect the 8-pin mini-DIN on the
cable to the SIMATIC MV340.
3. Connect the 9-pin D-sub connector to
the host computer's serial port.
4. Connect the cable to the power supply.
5. Plug in the power supply and power-on
the host.
6. Start up a terminal program (such as
ESP's Terminal view or HyperTerminal)
and set to 57.6K baud, 8 data bits,
none parity, and 2 stop bits.
7. Read the Reset to RS-232 Factory
Defaults symbol below.
8. Read the Save Settings symbol.
Save
Settings
1-4
Description
Reset to RS-232
Factory Defaults
Test Symbol
(ABCDEFGHIJKLMNOP)
Part Number
6GF3340-0HT01
6GF3020-0AC40-0AC1
6GF3020-0AC40-0AC3
6GF3020-0AC40-0AC4
6GF3020-0AC40-0AC5
RS-232 Configuration
SIMATIC MV340 User's Manual