Type: EFI75XX HEYLO GmbH of Im Finigen 9, D-28832 Achim, Germany, declares that, if they are fitted, maintained and used in conformity with the operating instructions and the generally accepted engineering standards, the machines mentioned are in keeping with the fundamental safety and health requirements. In case of unauthorised changes of the machine, the directives shall forfeit their validity.
Keep away from children: Do not allow children to play with or in the vicinity of the unit. Electric connection: HEYLO PowerVent 4200 EX has been designed for operation at 115 / 230 V and 50 / 60 Hz. In explosive atmospheres, the device may be operated only with attached special plug.
(2) Possible application In potentially explosive environments, transport ventilator PowerVent 4200 EX is the right choice. It draws off dangerous gases safely and quickly. The housing made of a robust ABS carbon plastic passes voltage into the floor and thus prevents static charges and for this reason dangerous sparking. The housing and motor sealing is in keeping with the high protection class IP65 and offers an effective protection against dust and water.
Special features in explosion-proof areas: Installation conditions and different hazardous areas have to be observed. Connect device to explosion-proof power socket only. Only use antistatic air hoses and ground them, when required. Accessories Please use suitable accessories only ! For use in non-explosive areas you can use the following accessories: 1450290 Connection adapter from 230 CEE to 230 V shockproof plug...
Page 6
Explosion protection | Classification Explosion groups, temperature classes If the device group and the device category is used to determine, in which zone an apparatus may be used, the explosion group and the temperature class determines, for which media the apparatus may be used within the zones.
If and when necessary remove and repair the damaged cable. Do not take the air mover apart for maintenance purposes. The air mover is maintenance-free. Replace the special screws and washers as well as parts of the air mover by original HEYLO spares parts exclusively.
Unbalance of the impeller. Balance or replace the impeller. Impeller is bent. Replace impeller. Motor shaft is bent. Replace motor. B = user / HS = HEYLO service Ask your local dealer for spare parts or get in touch with HEYLO service department.
Need help?
Do you have a question about the PV 4200 EX and is the answer not in the manual?
Questions and answers