Samsung DVD-P171 Manual page 7

Rear Panel
1. AUDIO OUT JACKS
Connect to the Audio input jacks of your televi-
sion or audio/video receiver.
2. VIDEO OUT JACK
- Use a video cable to connect to the Video
input jack on your television.
- The Video Output in Setup Menu must be set
to Component(I-SCAN).
3. DIGITAL AUDIO OUT JACKS
- Use either coaxial digital cable to connect to a
compatible Dolby Digital receiver.
- Use either coaxial digital cable to connect to
an A/V Amplifier that contains a Dolby Digital,
MPEG2 or DTS decoder.
Note
- Consult your TV User's Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User's Manual regarding Progressive Scan settings in
the TV's menu system.
- See pages 25 to get more information on how to use the setup menu.
4
3
2
1
4. COMPONENT VIDEO OUT
JACKS
- Use these jacks if you have a TV with
- If Component(P-SCAN) Video Output is select-
- If Component(I-SCAN) Video Output is select-
Component Video in jacks. These jacks pro-
vide P , P and Y video.
R B
ed in Setup Menu, progressive scan mode will
work.
ed in Setup Menu, interlaced scan mode will
work.
7