Please check the following before calling for service. It may save you time and expense.
PROBLEM
1. Part or all of Microwave
In-A-Drawer
does not
™
operate.
2. Food in microwave is not
heated.
3. Microwave In-A-Drawer
light does not work.
4. Touch controls will not
operate.
5. Display flashes.
6. Steam from the vent.
Before You Call For Service
Heading
POSSIBLE CAUSE
• Power cord of Microwave In-A-
Drawer
is not completely connected
™
to the electrical outlet.
• Power outage.
• Fuse/circuit breaker at home doesn't
work.
• Microwave In-A-Drawer
Mode.
• No power to the appliance.
• Drawer controls improperly set.
• Drawer is in Demo Mode.
• Light bulb is loose or burned out.
™
• Control Lock is on.
• Power failure.
• Normal operation. During
microwaving, steam may come
from the right side of the vent.
• Make sure the power cord is tightly
connected to the outlet.
• Check house lights to be sure. Call your
local electric company for service.
• Replace the fuse or reset the circuit
breaker.
is in Demo
• See page 15 for how to cancel Demo
™
Mode.
• See SOLUTION for PROBLEM 1.
• Check if the controls have been properly
set.
• See page 15.
• Call for service.
• See page 15 to unlock.
• Press the STOP/CLEAR key and reset
the clock. If the Microwave In-A-Drawer
was in use, you must reset the cooking
function.
E17
SOLUTION
™