Replacing The Display Cable; Procedure; Post-Requisites - Dell P28E Service Manual

Replacing the display cable

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Route the display cable through the routing guides on the display back-
cover.
2 Adhere the tapes that secure the display cable to the display back-cover.

Post-requisites

1 Replace the camera.
2 Replace the display
3 Replace the display
4 Replace the display
5 Replace the power-adapter
6 Replace the system
7 Replace the heat-sink
8 Replace the I/O
9 Follow the procedure from step 3 to step 8 in
base".
10 Follow the procedure from step 4 to step 7 in
drive".
11 Replace the keyboard.
12 Replace the memory
13 Replace the wireless
14 Follow the procedure from step 4 to step 6 in
15 Replace the base
16 Replace the battery.
102
computer. After working inside your
panel.
bezel.
assembly.
port.
board.
assembly.
board.
modules.
card.
cover.
After working inside your
"Replacing the computer
"Replacing the optical
"Replacing the hard drive".