U-Line 3000 Series User Manual & Service Manual page 7

USER GUIDE
EXTENDED INTEGRATED PANEL
NOTICE
Due to differences in surrounding cabinetry the
panel may not perfectly align with door. The
procedure below is designed to provide a
finished panel that seamlessly integrates with
surrounding cabinetry.
Panel Preparation
An extended integrated panel can be used to maintain
alignment with an adjacent extended cabinet height or a
reduced toe-kick/grille application.
1. Cut the panels to the dimensions listed in the
appropriate diagram on the next page.
2. Optional: Stain or finish panel to desired stain or color.
Be sure to closely follow the instructions provided by
the manufacturer.
Integrated Panel/Integrated Frame
Cabinet
> 3-5/16"
(> 89 mm)
*Panel can extend beyond the door frame.
**A minimum of 1" (25 mm) from the floor
is required for proper ventilation.
Integrated Panel Dimensions
U-Line
Unit
3-5/16" (89 mm)
to
4-5/16" (114 mm)
Floor
Extended Integrated Panel/Extended Integrated Frame
Cabinet
3. Optional: Install handles and hardware.
NOTICE
The door panel must not weigh more than 20 lbs
(10 kg).
It is important to ensure that all drilled holes are
drilled to the correct depth in order to avoid
splits in the wood when hardware is installed.
Appliance will need up to 34-1/2" (876 mm) to
the underside of the counter to leave room for
leveling adjustments.
When applying an integrated panel to a unit,
ensure that both sides are finished in order to
prevent warping. In some installations, the
panel may be visible through the glass while the
door is open.
Integrated Panel
U-Line
Unit
3-5/16" (89 mm)
to
4-5/16" (114 mm)
U-Line
Unit
*
3-5/16" (89 mm)
to
1" (25 mm)**
Floor
7
Integrated Panel
U-Line
Unit
3-5/16" (89 mm)
to
1" (25 mm)**
u-line.com