7.2 INSTALLATION PLACE PROVISION
● Secure the outdoor unit with the anchor bolts.
● Fix the outdoor unit to the anchor bolts by field-supplied
special washer.
● When installing the outdoor unit, fix the unit by anchor
bolts. Regarding the location of fixing holes
12.5
223
75
● Example of fixing outdoor unit by anchor bolts.
A
is diff
● When installing the unit on a roof or a veranda, drain
water may turn to ice in a cold morning. Therefore,
avoid draining in an area where people often use
because it is slippery.
In case of installing in such a place, provide the
additional drainage around the foundation.
Drain Hole
Drain Hole 4× 24
Special Washer
Rubber Mat
Anchor Bolt
Concrete
653
225
12.5
Anchor bolt
1100
27 32.4
205
205
● The whole of the base of the outdoor unit should be
installed on a foundation. When using vibration-proof
mat, it should also be positioned in the same way. When
installing the outdoor unit on a field-supplied frame,
use metal plates to adjust the frame width for stable
installation as shown in figure.
Outdoor unit is
unstable
Unit:mm
Outdoor unit
is stable
Recommended metal plate size (field-supplied
- Material: Hot-rolled mild steel plate (SPHC)
- Plate thickness: 4.5T
Unit:mm
108
11
GENERAL DIMENSIONS
INCORRECT
75mm
Base width of
outdoor unit
Frame
75mm
Frame width
(field supplied)
CORRECT
75mm
Base width of
outdoor unit
Frame
100mm or more