Troubleshooting; Maintenance And Cleaning; Cleaning The Detergent Drawer - Beko BFLB8020W User Manual

ing the front door. Once access is estab-
lished to the product, you will see a screen
similar to the one below.
When the Remote Control is on, you can
only manage, turn-off and status follow-up
operations through your washing machine.
And all functions except child lock can be
managed through the application.
You can monitor from the function indic-
ator on the button whether the Remote
Control function is on or off.
If the Remote Control function is off, all op-
erations are performed over the machine,
only the performance of status follow-up is
allowed over the application.
If the Remote Start function cannot be
turned on, you will hear a warning sound
when you press the button. This may be ex-
perienced if the appliance is turned on and
there is no appliance paired with Bluetooth.
As an example for these cases; the
Bluetooth setting is turned off or the
product cover is open.

7 Maintenance and Cleaning

Please read the "Safety Instruc-
tions" section first!
Service life of your product extends and fre-
quently experienced problems will be re-
duced if it is cleaned at regular intervals.

7.1 Cleaning the Detergent Drawer

Clean the detergent drawer at regular inter-
vals (once every 4 to 5 wash) as mentioned
below to prevent accumulation of powder
detergent.
Clean the syphon if excess amounts of wa-
ter and fabric softener mixture remains in
the softener compartment.
When you activate this function in the
washing machine, this function remains
active except under certain circumstances
and allows you to control your washing ma-
chine remotely via Bluetooth.
Under certain conditions, it is automatically
disabled for safety reasons:
• When your machine's power is cut.
• When the program button is turned and a
different program is selected or the appli-
ance is turned off.

6.15.4 Troubleshooting

If you are having trouble on controlling or
connecting, apply the following steps. Ob-
serve whether the problem persists or not
after the action you have performed.
1. Check whether your smart device is con-
nected to the relevant home network.
2. Restart the product application.
3. Turn bluetooth off and then on via user
control panel.
4. If the connection cannot be established
with the above processes, repeat the ini-
tial set-up settings on the washing ma-
chine.
If the problem persists, consult an Author-
ised Service Agent.
1. Press the marked part of the syphon
within the softener compartment and
then pull the drawer towards yourself to
take it out.
2. Lift and remove the syphon from behind
as shown.
EN / 35