Intrepid Control Systems RAD-wBMS User Manual page 42

6.5.6 Network Enables
Network Enables displays a list of networks available on all Intrepid devices. By default, this page only displays
networks that are supported by the RAD-wBMS. These networks are listed below.
• DW CAN 01
• DW CAN 02
• Ethernet
Hide Unsupported Networks
When checked, this feature hides all networks except for the networks supported by the RAD-wBMS. This feature is
enabled by default, but can be disabled if you wish to see networks that are supported on other Intrepid devices
Enable On Boot
When checked, this feature will automatically enable compatible networks with your device. This may be turned off if
one of your networks needs to be turned off for a project or assignment
Send Bus Traffic to Android
This setting is not applicable to the RAD-wBMS and can be ignored
Enable All
Enables all networks listed on the screen. Clicking this button will set checkmarks for all networks; if you use it, be
sure to disable networks that should be off, so the device remains in a valid configuration
Disable All
When clicked, this feature disables all networks that are listed on the screen
6.5. RAD-wBMS Port Configurations
RAD-wBMS User Manual
40