The Neovi Explorer Configuration Utility; Starting And Using Neovi Explorer - Intrepid Control Systems RAD-wBMS User Manual

Note
No firmware changes will modify the settings parameters of the device radios
The neoVI Explorer utility allows you to connect, manage and configure all of your Intrepid Control Systems hard-
ware.This section will describe general features and the basics of using neoVI Explorer, so you will understand the
utility when we get into settings specific to your device.

6.1 Starting and Using neoVI Explorer

The neoVI Explorer utility is available as an integrated feature of Vehicle Spy, and as a standalone program.
6.1.1 Starting neoVI Explorer from within Vehicle Spy
There are several ways to open neoVI Explorer from within Vehicle Spy 3. These are the most common ways since
they are accessible at all times:
• Menu Item: At the top menu bar, under Setup, select Hardware
• Setup Hardware Button: Click the button located in the main Vehicle Spy toolbar just under its menu (Figure
below).
Note
neoVI Explorer cannot be launched when Vehicle Spy is online (even in simulation mode). If you attempt to do so,
VSpy will prompt you to either go offline and launch neoVI Explorer, or remain online and return to Vehicle Spy.

THE NEOVI EXPLORER CONFIGURATION UTILITY

CHAPTER
SIX
30