Quick Setup / Connection Diagram - ION HOUSE PARTY iPA18L Quick Start Manual

Quickstart Guide (English)
Support
For product registration, visit the ION website: ionaudio.com
For additional product support, visit ionaudio.com/support
For safety/warranty information, visit ionaudio.com/warranty
WARNING: DO NOT splash or immerse in water or other liquids.
Not for use in rain. Use only in dry locations.
WARNING: DO NOT look directly into the dome light. Do not sit,
stand, or apply pressure on the dome light.

Quick Setup / Connection Diagram

1. Make sure all items listed in Box Contents at the beginning of this guide are included in the box.
2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT.
3. For optimal performance, place House Party in the center of the room so it is unobstructed by walls,
furniture, etc.
4. Move Light Mode switch to OFF.
5. Turn down the Master Volume on the House Party.
6. Turn on House Party.
7. Connect your music player with an audio cable or Bluetooth (see Connecting with a Bluetooth Device
for more details on this).
8. Adjust the volume on your music player and on House Party as needed.
9. Adjust the Light Mode switch on House Party as needed.
10. Turn off House Party when not in use.
MP3 PLAYER
(not included)
Included Audio Cable
with 1/8" (3.5mm)
connectors
MICROPHONE
(not included)
TOP PANEL
3
BOX CONTENTS

House Party

Audio Cable with 1/8" (3.5mm)
connectors

Quickstart Guide

Safety Instructions & Warranty
Information Booklet
REAR PANEL
POWER