Specifications - Panasonic GA-ML8TPoE+ Installation Manual

1.2 Specifications

Interface
Switching mode
Link Aggregation
VLAN
QoS
Management method
PoE Power supply function Ports 1 to 8 support the IEEE802.3at/af compatible power supply function.
PoE Power supply method Alternative A (Using 1,2,3,6 pin)
Silent fan control
Twisted pair port 1-8: RJ45 connector (*1)
Transmitting and receiving network system
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.3ab 1000BASE-T
Twisted pair port 9,10: RJ45 connector
Transmitting and receiving network system
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.3ab 1000BASE-T
(*1) Energy Efficient Ethernet function
IEEE802.3az(LPI)
SFP extension slot 9,10port
Transmitting and receiving network system
IEEE802.3z 1000BASE-SX/1000BASE-LX
*Select either RJ45 or SFP for use
SFF-8472 (DMI:Diagnostic Monitoring Interface)
Console port: RJ45 connector
RS-232C(ITU-TS V.24)
Store and Forward method: Forwarding rate
10BASE-T:
100BASE-TX:
1000BASE-T:
MAC Address table:
Buffer:
* EAP frame, BPDU frame transmission
IEEE802.3ad
Configurable up to 5 groups (Max. 8 ports per group)
IEEE802.1Q tagging VLAN protocol compatible
(Max. 256 groups including the default VLAN)
Port based VLAN, Internet Mansion function
IEEE802.1p compatible, Supports 8 priority queues
ZEQUO assist Plus, SNMP v1/v2c/v3, Telnet, SSH v2, Console,
WEB control screen
Maximum power supply: 30 W per port, 124 W in total
The fan rpm can be set in accordance with the usage environments.
If the fan rpm are set, the available power supply will be
automatically restricted. If the fan rpm (Fan Speed) are set to Low1,
or Min, the device's overall available power supply (Power Budget)
will be automatically restricted, and it can be used with the fan noise
reduced.
Operating
Fan Speed environment
temperature
High
0-50°C
(Low1)
Low
(Low2)
0-40°C
Min
Max. 14,880 pps/port
Max. 148,800 pps/port
Max. 1,488,000 pps/port
Max. 16K entry/unit
2.0Mbyte/unit
Available
Comments
PoE power
124W Factory default
62W
124W
62W
9