Randell 2135 Specifications

Upright Roll-In Single Door Refrigerator
Description:
Randell Series 2000 Single Section Roll-Ins are built for years of
efficient, high performance service. The top mounted, expansion
valve refrigeration system offers the highest, most consistent
performance available while maximizing usable interior space.
Finishes:
Standard Series
Doors/Louver: Stainless steel.
Exterior Sides: Anodized aluminum. Interior: Anodized aluminum
E Series
Cabinet interior, exterior sides, fronts,
and doors stainless steel.
Specifications:
CABINET EXTERIOR: Cabinet body is constructed of all metal,
inside & out. The top, bottom, & back are galvanized steel. Front
and sides are available in finishes as listed above. Door and louver
are stainless steel and are removable without tools. Provided with
stainless steel removable ramp.
CABINET INTERIOR: Interior of cabinet is fully coved to meet N.S.F.
standard #7. Solid core stainless steel interior floor is standard.
The interior walls, ceiling and door liner are available in either
stainless steel or anodized aluminum as listed above. Foamed in
place, CFC free urethane insulation. Snap-in A.B.S. breaker strips
allow access to condensate heater wires. Provided with stainless
steel rack guide.
DOORS: Stainless steel front with either anodized aluminum or
stainless steel liner, mounted on (3) heavy duty cam lift hinges
with heavy duty chrome handle, and cylinder door lock.
REFRIGERATION: Top mounted condensing unit and evaporator coil,
expansion valve system with thermostatic control, factory tested
and balanced to maintain 38˚ F. average interior temperature utiliz-
ing CFC free 134a refrigerant. Evaporator coil is coated to resist
corrosion. Unit supplied with master on/off switch and 8' cord and
plug. Access to service points without tools is standard.
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Standard Features:
• Expansion Valve
• Exterior LED Temperature Display
• Top mounted Compressor & Evaporator Coil
• C.F.C. Free R-134a Refrigerant
• Efficient Hot Gas Condensate Evaporator
• Automatic Defrost
• 8' Cord & Plug
• Main Power Supply Switch
• Self-Closing, Cam Lift Hinges with 120˚ Open Feature
(Lifetime Warranty)
• Triple Hinged Doors
• Cylinder Door Locks
• Solid Core Stainless Steel Interior Bottom
• Polyurethane Insulation
• Snap-In Magnetic Door Gaskets
• Stainless Steel Interior Rack Guide
• Stainless Steel Removable Ramp
• Fully Coved Interior meeting N.S.F. Standard #7
model 2135
33°F to 40°F
Randell Upright, Page 16
Revised 04/06
33°F to 41°F 18°F to 22°F