1. Manuals
  2. Brands
  3. SIIG Manuals
  4. Enclosure
  5. 2.5" USB 2.0/eSATA to SATA Enclosure
  6. Quick installation manual

SIIG 2.5" USB 2.0/eSATA to SATA Enclosure Quick Installation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Introducing the USB 2.0 2.5" Enclosure
The 2.5" USB 2.0/eSATA to SATA Enclosure is
designed to support USB or eSATA equipped
computers. This enclosure provides large capacity
mobile storage using 2.5" SATA hard disk drives
through hot-swapping USB 2.0 or eSATA
interface.
Key Features and Benefits
•
Quickly adds more storage space to your
USB- or eSATA- enabled PC
•
No driver installation required. Simply
install a 2.5" SATA (3Gb/s or 1.5 Gb/s)
hard disk into the enclosure then connect to
a USB port or eSATA port
•
Supports Hi-Speed USB 2.0 data transfer
rate up to 480Mb/s
•
Compliant with Universal Serial Bus 2.0
Specification
04-0652A
2.5" USB 2.0/eSATA to
SATA Enclosure
Quick Installation Guide
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2.5" USB 2.0/eSATA to SATA Enclosure and is the answer not in the manual?

Questions and answers

Related Manuals for SIIG 2.5" USB 2.0/eSATA to SATA Enclosure

Summary of Contents for SIIG 2.5" USB 2.0/eSATA to SATA Enclosure

  • Page 1 2.5" USB 2.0/eSATA to SATA Enclosure Quick Installation Guide Introducing the USB 2.0 2.5" Enclosure The 2.5" USB 2.0/eSATA to SATA Enclosure is designed to support USB or eSATA equipped computers. This enclosure provides large capacity mobile storage using 2.5" SATA hard disk drives through hot-swapping USB 2.0 or eSATA interface.

  • Page 2: System Requirements

    System Requirements • Desktop or notebook PC with an available USB 2.0/3.0 or eSATA port • Windows 7 (32-/64-bit) ) / Vista (32-/64- ® bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / 2000 SP4 Package Contents • 2.5"...

  • Page 3: Hardware Installation

    USB power connector USB data (for extra power) connector Figure 2: USB cable Hardware Installation The following section guides you through the installation of your drive kit. Installing a 2.5" Hard Drive Remove the 2 screws in each side, see Figure 3.
  • Page 4 Take off the PCB and connect it to the hard disk drive, see Figure 5 and Figure 6. Figure 5 Figure 6...
  • Page 5 Put the installed PCB with hard disk drive into the hard disk drive tray, see Figure 7. Figure 7 Hold onto the hard disk drive and turn the hard disk drive tray over. Secure the hard disk drive with four mounting screws, see Figure 8.
  • Page 6 Slide the lower cover back into the case and secure it with the two mounting screws, then slide the upper cover back into the case and secure it with the two mounting screws. Connect the enclosure to the computer via USB or eSATA.

  • Page 7: Driver Installation

    Go to Driver Installation to complete the installation in the next page. Driver Installation Windows will automatically detect and install drivers for the 2.5" USB 2.0/eSATA to SATA Enclosure. No additional driver installation is needed. Using the 2.5" USB 2.0/eSATA to SATA Enclosure An additional drive icon will appear in My Computer or Computer when the enclosure is...

  • Page 8: Disconnecting From The Computer

    For Windows 7: Right click Computer, click Manage, click Device Manager. For Windows Vista: Right click Computer, click Manage, click Continue, click Device Manager. For Windows 2000 / XP / Server 2003: Right click My Computer, click Manage, click Device Manager. For Windows Server 2008: Right click Computer, click Manage, double click Diagnostics, click Device Manager.
  • Page 9 USB Connection Windows 7 Verify that the LED is not flashing before proceeding. Click Show hidden icons, click the Safely Remove Hardware and Eject Media icon located in the system tray by the system clock. Click Eject USB to Serial-ATA bridge. You can now unplug or turn off the 2.5"...
  • Page 10 Windows XP / Server 2003 Verify that the LED is not flashing before proceeding. Double click the Safely Remove Hardware icon located in the system tray by the system clock. Highlight Mass Storage Device, click Stop, OK, OK then Close. You can now unplug or turn off the 2.5"...
  • Page 11 eSATA Connection Check in Device Manager to verify successful driver installation. For Windows 7: Right click Computer, click Manage, click Device Manager. For Windows Vista: Right click Computer, click Manage, click Continue, click Device Manager. For Windows 2000 / XP / Server 2003: Right click My Computer, click Manage, click Device Manager.
  • Page 12 Blank Page...
  • Page 13 Blank Page...
  • Page 14 Blank Page...

  • Page 15: Technical Support And Warranty

    (5) years from the date of purchase of the product. SIIG will, at our discretion, repair or replace (with an identical product or product having similar features and functionality) the product if defective in materials or workmanship.
  • Page 16 Fremont, CA 94538-3152, USA Phone: 510-657-8688 2.5" USB 2.0/eSATA to SATA Enclosure is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other names used in this publication are for identification only and may be trademarks of their respective owners.

Table of Contents