Table of Contents
Advertisement
Quick Links
USB 3.0 to SATA Hard Drive
with SD reader Enclosure - 2.5"
User Reference Guide
Introduction
The USB 3.0 to SATA Hard Drive with SD Reader
Enclosure - 2.5" is a combination of 2.5" SATA
HDD/SSD enclosure and SD/MicroSD memory
card reader which enables you to access your data
through a single USB connection.
LOT Number Sticker
For future product return or exchange, this LOT
number is required. Please keep it for your reference.
LOT Number
Part Number
04-1023A
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SIIG USB 3.0 to SATA Hard Drive with SD reader Enclosure - 2.5"
Summary of Contents for SIIG USB 3.0 to SATA Hard Drive with SD reader Enclosure - 2.5"
- Page 1 USB 3.0 to SATA Hard Drive with SD reader Enclosure - 2.5" User Reference Guide Introduction The USB 3.0 to SATA Hard Drive with SD Reader Enclosure - 2.5" is a combination of 2.5" SATA HDD/SSD enclosure and SD/MicroSD memory card reader which enables you to access your data through a single USB connection.
-
Page 2: Key Features And Benefits
Key Features and Benefits • All-in-one 2.5" SATA HDD/SSD enclosure and SD/MicroSD memory card reader, easily access various storage media through a single USB connection • Compatible with 9.5mm and 7mm height 2.5" SATA I/ II/ III drives • Supports SuperSpeed USB 3.0 data transfer rates up to 5Gb/s with UASP for optimal performance •... -
Page 3: Specifications
Specifications Source: USB 3.0 Type-A (9-pin), Female Connectors Device: SATA data and power connector (7+15 pin), Female Drive Type SATA Drive Size 2.5" (9.5mm/7mm) Max Drive Capacity Up to 4TB SD/Micro SD (SDHC/SDXC) #1 SD v1.0/ v1.1/ v2.0/ SDHC/ SDXC Memory Card Types #2 SD v3.01 UHS-I (Ultra High Speed): SDR12/ SDR25/ SDR50/ DDR50/ SDR104... -
Page 4: System Requirements
System Requirements • Desktop or notebook computer with an available USB port (USB 3.0 port recommended) • Windows 10 (32-/64-bit) / 8 (32-/64-bit) / ® 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/ 64-bit) • Windows Server 2003 & 2008 (32-/64-bit) / 2008 R2 / 2012 / 2012 R2 •... -
Page 5: Hardware Installation
Hardware Installation Take the included protective silicon sleeve off, and turn the enclosure onto the back side. Press and push forward to release the back cover. Figure 2 Insert and connect your SATA 2.5" HDD or SSD, line up the sata connector, then gently insert the drive into the case. - Page 6 Align the latches on both covers, and push the back cover down to close the enclosure. Figure 5 Attach the included protective silicon sleeve to the enclosure. Figure 6 Connect the Micro-B port of the enclosure to USB port of a computer using the included USB cable.
- Page 7 Application The USB 3.0 to SATA Hard Drive with SD Reader Enclosure - 2.5" provides an ideal solution to easily access your data. It includes a 2.5" SATA HDD/ SSD enclosure and SD or microSD memory card reader through a single USB connection. Note: Only one memory card can be inserted at any one time.
- Page 8 Blank Page...
- Page 9 Blank Page...
- Page 10 Blank Page...
- Page 11 SIIG will, at our discretion, repair or replace (with an identical product or product having similar features and functionality) the product if defective in materials or workmanship.
- Page 12 Fremont, CA 94538-3152, USA Phone: 510-657-8688 USB 3.0 to SATA Hard Drive with SD Reader Enclosure - 2.5" is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. All other names used in this publication are for identification only and may be trademarks of their respective owners.
Need help?
Do you have a question about the USB 3.0 to SATA Hard Drive with SD reader Enclosure - 2.5" and is the answer not in the manual?
Questions and answers