Cisco Aironet 1815w Getting Started Manual page 8

4
Unpacking the AP
To unpack the access point, follow these steps:
Step 1 Unpack and remove the access point and the mounting accessories, from the shipping box.
Return any packing material to the shipping container and save it for future use.
Step 2
Step 3 Verify that you have received the items listed below. If any item is missing or damaged, contact
your Cisco representative or reseller for instructions.
The access point
–
Mounting wall-plate bracket AIR-AP-BRACKET-W3, and screws.
–
Torx security screw and mylar label to cover the screw.
–
The following accessories can be ordered separately from Cisco:
• Spacer kit AIR-AP1815W-KIT=, includes spacer box, RJ-45 jumper cable, four M3.5x32
mounting screws, two #6-32x1.62" truss head machine screws, two M3x8 pan head mounting
screws.
• Physical security kit AIR-SEC-50=, which includes 50 security screws used to secure the access
point onto the wall-mounting bracket, 50 RJ-45 block-out plugs and 2 unlock keys for blocking
physical access to the RJ45 Ethernet ports.
• Bracket Kit AIR-AP-BRACKET-W3, includes the mounting bracket, one M2x5.5 Torx security
screw , two M3.5x32 pan head mounting screws, two #6-32x0.81" truss head machine-type
mounting screws.
8