LUNA2000-100KTL-M1 Smart Power Control System
User Manual
7.2.2 Logging In to the App
Prerequisites
●
●
Procedure
Step 1 In the SUN2000 app, select a connection mode.
Issue 07 (2023-07-15)
NO TE
● Configurable parameters vary depending on the grid code.
● The parameter names, value ranges, and default values are subject to change. The
actual display may vary.
The DC or AC side of the Smart PCS has been powered on.
When connecting through a WLAN module:
a.
The WLAN module has been inserted into the USB port at the bottom of
the Smart PCS.
b.
The WLAN function has been enabled on your phone.
c.
Keep the mobile phone within 5 m from the Smart PCS. Otherwise, the
communication between them might be affected.
NO TE
● The screenshots in this section correspond to the SUN2000 app 6.23.00.125 (Android).
● When the WLAN connection is used, scan the QR code of the WLAN module to access
the login screen.
● When the WLAN connection is used, the initial name of the WLAN hotspot is Adapter-
WLAN module SN and the initial password is Changeme. Use the initial password for
the first login and change it immediately after login. To ensure account security, protect
the password by changing it periodically, and keep it secure. Your password might be
stolen or cracked if it is left unchanged for extended periods. If a password is lost,
devices cannot be accessed. In these cases, the Company shall not be liable for any loss
caused to the plant.
Copyright © Huawei Technologies Co., Ltd.
7 Power-On and Commissioning
56