Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Board's communication settings Panel
This panel is used to change the FMod-IPAXESCTRL
board's communication parameters:
• IP address: Press the "Change" button and the new
one will be valid only when all connected users will
have closed their connection (begun with the
previous IPaddress). At that moment the IP address in
the address bar of the browser will have to be
changed to access the applet again.
• Subnet mask: useful only for special UDP directed
broadcast
• TCP Watchdog: Maximum time before automatic
disconnection if the client does not send any packet.
• Module name of your choice.
• Module hardware MAC address (read only).
26 / 71
FMod-IPAXESCTRL User Manual v.1.1
Advertisement
Table of Contents
