Gas Connections - Napoleon FREESTYLE F365DPGT Owner's Manual

Table of Contents

Advertisement

Available languages

Available languages

g
c
aS
onnectionS
To a Propane Cylinder: Option 1
Only use a 20 lb. (9.1 kg) propane cylinder constructed and marked in accordance with the Specifications for LP gas Cylinders
of the U.S. Department of Transportation (D.O.T.) or the Standard for Cylinders, Spheres and Tubes for Transportation of
Dangerous Goods and Commission, CAN/CSA-B339, as applicable.
Only use a gas pressure regulator specified by Napoleon. The regulator must supply a pressure of 11 inches water column (0.39
psi) and have a QCC1 type fitting.
The cylinder connection device must be compatible with the connection for this outdoor appliance.
The propane cylinder must have:
• A shutoff valve with a QCC1 connection
• A safety relief device
• A collar to protect the valve
• A listed Overfill Protection Device
Hook-up and Installation
• Check the cylinder for dents or rust, and have it inspected by your propane supplier.
• Never use a cylinder with a damaged valve.
• Place the cylinder in its designated area on the bottom shelf.
• Ensure the gas regulator hose has no kinks.
• Remove the cap or plug from the cylinder fuel valve.
• Insert the black QCC1 regulator nipple onto the QCC1 fuel valve. Hand tighten to right. Do not use tools.
• Ensure the hose does not contact with the drip pan or any high temperature surfaces of the grill because it will melt and
cause a fire.
• Leak test all joints prior to operating the grill. See "Leak Test".
WARNING! Do not store a spare gas cylinder below the grill head or side burners.
WARNING! Never use a gas cylinder that is beyond 80% full.
6
| Getting Started
1
2
3
!
®
Napoleon.com | Freestyle
Series Grills

Advertisement

Table of Contents
loading

Table of Contents