EverFocus EPHD04 Series User Manual page 43

9. To operate the Auto Pan function, click the Auto Pan button.
10. To operate the Pattern function, click the Pattern button. The Pattern is the "0" Tour in
Everfocus and Pelco PTZ cameras.
11. To operate the Tour function:
a. Click the Tour button.
b. Click the desired Tour number.
c. Click the Go button.
12. To remove a pre-configured Tour (if supported by the camera):
a. Click the Tour button.
b. Click the desired Tour number.
c. Click the Delete button.
Click C to clear the entered number in the Number Box.
Click X at the top-right corner to hide the PTZ Control Panel (see 4.1.1 Express Control of PTZ). To
display the PTZ Control Panel, right-click on the screen.
Click Exit to close the PTZ Control Panel and exit the PTZ mode.
Note: Before start using the Auto Pan, Pattern and Tour functions, you have to configure the
related settings for the connected PTZ cameras. Please refer to the User's Manual of your PTZ
cameras.
35
EPHD04+ HDcctv DVR