Table of Contents
Advertisement
DISPLAYS AND VOICE CONTROL
Fuel gauge
The fuel gauge in the driver display shows the
fuel level in the tank.
The figure is schematic - parts may vary depending
on car model.
The beige zone in the fuel gauge indicates the
quantity of fuel in the tank.
When the fuel level is low, the fuel pump sym-
bol illuminates and turns amber colour. The
trip computer also shows the distance to
empty tank.
Related information
Driver display (p. 77)
•
Filling fuel (p. 433)
•
Fuel tank - volume (p. 641)
•
80
Trip computer
The car's trip computer records vales such as
e.g. distance, fuel consumption and average
speed whilst driving.
In order to facilitate fuel-efficient driving, infor-
mation is recorded about both instantaneous
and average fuel consumption. The informa-
tion from the trip computer can be shown in
the driver display.
Examples of trip computer information in the driver
display. The figure is schematic - parts may vary
depending on car model.
The following meters are included in the trip
computer:
Trip meter
•
Odometer
•
Instantaneous fuel consumption
•
Distance to empty tank
•
Tourist - alternative speedometer
•
Units for distance, speed, etc. can be changed
via system settings in the centre display.
Trip meter
There are two trip meters, TM and TA.
TM can be reset manually and TA is reset
automatically if the car is not used for at least
four hours.
The following information is registered while
driving:
Mileage
•
Driving time
•
Average speed
•
Average fuel consumption
•
The values apply from the trip meter's latest
reset.
Odometer
The odometer records the car's total mileage.
This value cannot be reset to zero.
Instantaneous fuel consumption
This gauge shows the fuel consumption that
the car has at the moment. The value is upda-
ted approximately every second.
Distance to empty tank
The trip computer calculates the
remaining mileage with the fuel
available in the tank.
Advertisement
Chapters
Table of Contents
