Page 2
ARA min i 6 RESEARCH USE ONLY PRODUCT INFORMATION Model : ARA mini6-RC Manufacturer : GYROZEN Co., Ltd. 1F & 5F, 16 Arayuk-ro, Gimpo-si, Gyeonggi-do, KOREA UM-mini6-RC(E)(Rev.0) 20210611...
USER MANUAL MINI CENTRIFUGE 1. Safety Precautions This manual contains information for proper use and maintenance of mini6 table-top centrifuge. Thus, Please read the manual before using it. 1-1. Precautions for Installation 1. Avoid hot, humid places and install in well-ventilated areas. 2.
USER MANUAL MINI CENTRIFUGE 1-2.Precautions for Use 1. Place the body on a flat, rigid surface. 2. Keep the body dry and clean. 3. When adding samples to the rotor, adjust the weight of the samples and place them symmetrically. 4.
USER MANUAL MINI CENTRIFUGE 3. Configuration As soon as the lid is closed, the rotor starts to spin. As soon as the lid is opened, the rotor stops to spin. Operating Direction Lid sensor Counterclockwise rotation Power Connector Lid open button Running Mode Selection Switch Button to open the lid * more infomation P.10...
* Components Angle Rotor Rotor Main Body Rotor Fixing Nut (1.5/2.0 mL x 6-hole) (2-PCR Strips) USER MANUAL ARA Smart 6 A Spanner for Rotor 0.2/0.5 mL Adaptor Power Cable User Manual Decoupling & Coupling (Optional) 4. Product Specifications Max. RPM 6,500 RPM Angle Rotor (1.5/2.0 mL x 6-hole) : 2,234 xg...
USER MANUAL MINI CENTRIFUGE 5. Installation and Operation Unpack the box, and check for the included components; A main body with an angle rotor coupled, a spanner, power cable, and user manual. Do not bend or pull the power adaptor too hard. For the first time the power is connected, the lid closure will not initiate spinning even if the lid is completely closed.
USER MANUAL MINI CENTRIFUGE 5-2. Operation 1. Rotor coupling and decoupling This model is supplied with a coupled rotor. In case of any needs of decoupling, use the supplied spanner. Counterclockwise turns make decoupling and clockwise for coupling the rotor. 2.
Page 10
USER MANUAL MINI CENTRIFUGE 5-3. Battery Mode Within the product an AC adapter is provided. When using portable without AC power, be sure to turn the switch on the lower part of the back of the product as shown in the figure below. It can be used after setting it to On.
USER MANUAL MINI CENTRIFUGE 6. Trouble Shootings If the equipment does not operate, 1. Incorrect connection between power adaptor and equipment. → Please check if the main body and the power adaptor are plugged in properly. 2. When the initial buzzing sound is not followed by power connection, there is high chance of faulty board problem.
Need help?
Do you have a question about the mini 6-RC and is the answer not in the manual?
Questions and answers