RCA RS2654 User Manual page 8

RS2654_EN 12/21/05 10:52 AM Page 16
CD Player
Selecting a Disc
EN
Press DISC SKIP to skip discs.
Selecting Folders
(mp3 / WMA CDs
Only)
In stop mode,
• Press FOLDER/PRESET to go to the
previous folder.
• Press FOLDER/PRESET to go to the
next folder.
The folder number (TF) shows briefly then the
total number of tracks (TT) is displayed.
Searching Through a CD
• Press SKIP BACKWARD / SKIP
FORWARD to skip to the previous or
next track.
• Press and hold SKIP BACKWARD
FORWARD to search through a CD
while it is playing.
Sampling Tracks
Press INTRO on the remote control to play the
first 10 seconds of each track on the current disc,
all discs in the tray, or turn intro mode off.
INTRO is displayed when sampling is activated.
10
Repeat
Press REPEAT on the remote control to repeat
the current track (REPEAT 1), current disc (REPEAT
1 DISC) , all discs (REPEAT ALL DISC), or turn
repeat mode off (ALL DISC).
Random Playback
Press on the remote control to turn on/off
random playback. The SHUFFLE icon is displayed
when it is activated.
All the tracks on one disc will be shuffled and
played once before shuffling and playing tracks
from the next disc.
Note:
The first 99 tracks of each disc will be
/ SKIP
shuffled and played once before any of
them is repeated.
Tips:
Random playback can be activated
simultaneously with repeat 1 disc (randomly
play tracks from one disc repeatedly) or
repeat all discs (randomly play tracks from
all discs repeatedly).
CD Player
Setting Up a CD Program
Tips:
You can create a program of up to 32 tracks.
1. While the CD player is stopped, press
PROG•SET to enter program mode. The
system displays the next available program
number (-- -- P:01).
2. Press DISC SKIP to select disc. Refer to the
DISC STATUS DISPLAY to see the disc that is
selected.
3. Press SKIP BACKWARD / SKIP
FORWARD to select the track to enter
into memory.
4. Press PROG•SET to save your settings.
5. Repeat steps 2 to 4 to store more tracks into
program memory.
Note:
Only the first 99 tracks from each disc can
be programmed.
Playing a Program List
While in PROGRAM mode , press PLAY/PAUSE .
If you are not currently in program mode, press
PROG•SET to enter program mode before
pressing PLAY/PAUSE .
Display Program List
1. While the CD player is stopped, press
PROG•SET to enter PROGRAM mode.
2. Press PROG•SET repeatedly to view each track
assignment in the program list.
Edit Program List
1. Follow "Display Program List" steps until the
location to be edited is displayed.
2. Repeat steps 2 to 4 under "Setting Up a CD
Program " to edit the track to store into
memory.
Deleting Program List
While in PROGRAM mode, press and hold STOP
for 3 seconds. They system displays the message
CLEAR.
11
EN