From Cd; Tape To Tape; From An Auxiliary Input; Tape Player (Logical) - RCA RS2501 User Manual

UG-2501 4/9/99 9:48 AM
TAPE PLAYER

From CD

1. Insert a tape into deck 1.
2. Press CD.
3. Insert the disc(s) to be recorded.
4. Select the track, CD, or program to be recorded.
5. Press RECORD to begin recording.
6. Press PLAY on the jog to begin playing the CD.
7. Press STOP to end recording.

Tape to Tape

1. Insert the destination tape in deck 1.
2. Insert the source tape into deck 2.
3. Press PAUSE and then RECORD on deck 1.
4. Press PLAYon deck 2. The playback and recording
start simultaneously.
TAPE PLAYER

Playing a Tape

1. Press TAPE.
2. Press the cassette
door to open it.
3. Insert a tape into the
door and push the
door closed.
4. Press REWIND or
FAST-FORWARD to
position the tape at
the desired starting position.
5. Press PLAY to play the tape.

Recording

From Tuner

1. Insert a tape into deck 1.
2. Press Tuner to access the desired radio band.
3. Tune to the station to be recorded.
4. Press REC/SCAN to begin recording.
5. Press STOP to end recording.
From CD
1. Insert a tape into deck 1.
2. Press CD.
3. Insert the disc(s) to be recorded.
Page 13
(6+2, 6+5)
(logical)
Tip: Your player can
record from any auxiliary
device, such as a televi-
sion, VCR, tuner, satellite,
or DVD player.

From an Auxiliary Input

1. Insert the cassette in deck 1.
2. Check that the auxiliary device has been
connected correctly to the AUX connector on
the back of the audio system.
3. Start playback on the auxiliary device.
4. Press RECORD on deck 1 to begin recording.
5. Press STOP to end recording.
4. Select the track, CD, or program to be recorded.
5. Press REC/SCAN to begin recording.
6. Press PLAY on the jog to begin playing
the CD.
7. Press STOP to end recording.
Tape to Tape
1. Insert the destination tape in deck 1.
2. Insert the source tape into deck 2.
3. Press REC/SCAN to begin recording
on deck 1.
4. Press STOP twice within 2 seconds to
start playing the tape in deck 2.
From an Auxiliary Input
Tip: Your player can record from any auxiliary
device, such as a television, VCR, tuner, satel-
lite, or DVD player.
1. Insert the tape in deck 1.
2. Check that the auxiliary device has been connected
correctly to the AUX connector on the back of the
audio system.
3. Start playback on
Tip: You can play a tape from
the auxiliary device.
either deck. For a logical
4. Press REC/SCAN
deck, press PLAY on the jog
to begin record-
to change the source from
ing deck 1.
one deck to the other.
5. Press STOP to
end recording.
GB
10