Disconnect From A Bluetooth Device; Reconnect With Your Devices; Restart The Earbuds - TCL MOVEAUDIO Neo User Manual

Notes
• When you pair the earbuds with a device for the first time after
purchase or after resetting the earbuds, the earbuds enter pairing
mode automatically if you open the charging case.
• If pairing is not established within 3 minutes, the pairing mode will
be cancelled and the earbuds will turn off.

Disconnect from a Bluetooth device

Disconnect your earbuds from the Bluetooth device using these methods:
• Put both earbuds in the charging case, and close the case.
• Turn off the Bluetooth function on your device.
Go to the Bluetooth menu of your device, tap your earbuds from the list of
paired devices, and select disconnection option.
NOTE: The disconnection procedure may vary depending on your device
model.

Reconnect with your devices

After successful pairing, the earbuds will automatically connect to the last
paired device if taken out of the charging case.
Notes
• The earbuds and Bluetooth device must be turned on and within
connection range.
• If the earbuds cannot find and connect to the last paired device,
they will enter pairing mode shortly. You can still reconnect your
earbuds to the device from the Bluetooth menu of your device.

Restart the earbuds

If you encounter connection or pairing issues when using your earbuds,
try restarting them by following these steps:
1. Put both earbuds in the charging case, and close the case.
2. Wait for more than 2 minutes.
3. Take your earbuds out of the case. The earbuds have been restarted.
10