Contents Read this first ........................... 3 Chapter 1. Welcome ......................... 4 What’s in the box ..........................4 Overview ............................. 4 Chapter 2. Get started ......................5 First Time Using - Activation........................ 5 Replace ear tips ..........................5 Wear the earphones ........................... 6 Chapter 3.
• TCL Communication Ltd. does not assume any liability that may occur due to the use or application of the product described herein. Every effort has been made in the preparation of...
Chapter 1. Welcome Congratulations on the purchase of your new TCL headphones! After it is set up and connected, you can enjoy wireless music and phone calls with high quality sound. You are recommended to read through this user manual which helps you set up, connect and operate the product easily and properly.
Chapter 2. Get started First Time Using - Activation Follow these steps to activate your earphone for the first time using. ❶ Take out the earbuds from the charging case. ❷ Peel off the insulation tape on the earbuds. ❸ Place the earbuds in the charging case.
Note For more tip sizes, see inside the box. Wear the earphones Put on the earphone, twist it to the proper position and fix it. Chapter 3. Charging Charge the case Charging case To charge the charging case, connect the case to a computer or a compatible USB adaptor with the supplied USB Type-C cable.
1.5H Note For best results, do not insert your earbuds in the charging case if they are wet or dirty. Check the battery status Charging case With no earbuds in the case, press the function button or open the charging case to check the charge status of the case from the LED indicator lights .
2. Press and hold the function button for 3 seconds. 3. The case LED indicator flashes in blue in cycle. 4. Unlock your device, and turn on the Bluetooth function on your device. Select TCL MOVEAUDIO Air from the list of available devices to complete the connection. 00:03 √...
isconnect from a Bluetooth device Disconnect your earbuds from the Bluetooth device using these methods: • Put both earbuds in the charging case, and close the case. • Turn off the Bluetooth function on your device. Go to the Bluetooth menu of your device, tap your earbuds from the list of paired devices, and select disconnection option.
When reset completed, the LED indicator on the charging case will flashing red for 3 times. 00:10 Chapter 5. Use your earbuds Tap or press the touch control area on the earbuds to control your music, phone calls, and other useful functions without getting out your phone. Both earbuds can be used separately. When you use one earbud, please keep the unused earbud in the case to prevent loss or battery drain.
Synchronise sound and visuals thanks to audio with low latency reach 120ms with supported device. Find more on www.tcl.com To turn on low latency mode, touch and hold the left and right earbuds at the same time for 3 seconds.
Head SAR: 0.203 W/kg It is considered improper use when this product is used for any application not named in this user manual. TCL Communication Ltd. bears no responsibility for accidents or damage caused by improper use of this product. aring lo Listening to sound at high volume may cause permanent hearing loss.
dical device interferenc Your device contains magnets which may interfere with medical devices such as pacemakers, defibrillators, or other medical devices within the range of 15 cm (6 inches). IF YOU ARE A USER OF ANY OF THESE MEDICAL DEVICES, PLEASE CONSULT WITH YOUR PHYSICIAN.
Radio Equipment Directive Declaration of Conformity Hereby, TCL Communication Ltd. declares that the radio equipment of type TCL TW12 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https:// www.tcl.com/global/en/EC_DOC...
California battery charger efficiency Disposal and recycling information At TCL, we continually strive to improve our operations and products, and minimize our impact on the environment. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
Check your country's local waste regulations for the proper How to dispose of my earbuds? disposal of electronic products. For more information, visit www.tcl.com. Connection problems Problem Solution • Make sure you have turned off the Bluetooth function of all previously paired devices.
Page 17
• Make sure your earbuds are not connecting other deivce. • Check if the earbuds are in the pairing mode. The LED I can't find my earbuds on the flashes white when the earbuds enter the pairing mode. pairing list of my device to make • Turn off the Bluetooth function of your device, and turn it connection for the first time.
Page 18
AVRCP. Check other apps to see if the problem still exists. If so, try to reconnect the earbuds. • Open the TCL Connect app to check whether the noise cancelling control function is assigned to your earbuds. The earbuds have three noise control modes: Noise cancellation, Transparency, and OFF modes.
Page 19
• For Android users: Install Google Assistant on your device, then try again. If you have installed Google Assistant, but forgot to set up Google Assistant for your earbuds, follow these steps: 1) Connect your earbuds to the device. 2) Open the Google Assistant app on your device.
Assistant™ is a trademark of Google™, Inc. USB Type-C™ USB Type-C™ is a trademark of USB Implementers Forum. TCL is a registered trademark of TCL Corporation in the U.S. and Canada. All other trademarks and trade names are the property of their respective owners.
Need help?
Do you have a question about the MOVEAUDIO Air and is the answer not in the manual?
Questions and answers